Assessment of Message Missing Failures in FlexRay-Based Networks

This paper assesses message missing failures in a FlexRay-based network The assessment is based on about 35680 bit-hip fault injections inside different parts of the FlexRay communication controller; the parts are: controller host interface, protocol operation control, coding and decoding unit, media access control and clock synchronization process. To do this, a FlexRay communication controller is modeled by Verilog HDL at the behavioral level. This HDL model of the controller is exploited to setup a FlexRay-based network composed of four nodes. The results of fault injection show that about 35% of faults led to the message missing failures. The controller host interface and the clock synchronization process of the FlexRay were the most sensitive parts to the message missing failures. The coding and decoding unit of the FlexRay was the least sensitive part to these failures.