DocumentCode
3101763
Title
Component Design Considerations for Active RFI-Filters for Drives
Author
Schinkel, M. ; Guttowski, S. ; Reichl, H. ; John, W.
Author_Institution
Dept. of Adv. Syst. Eng., Fraunhofer IZM, Berlin
fYear
2005
fDate
16-16 June 2005
Firstpage
1827
Lastpage
1832
Abstract
Active EMI-filters for attenuating radio frequency interferences (RFI) have been discussed for years. Several research projects have shown the potential of active EMI-filters to reduce cost, volume and weight while increasing simultaneously the filter performance. However, the application of active EMI-filters has been limited to a few very specific applications. In this paper design considerations for the passive components of the sensing device are determined in order to enlarge the application area of active EMI-filters. A detailed feasibility study of possible sensing devices is presented and the results are confirmed by measurements
Keywords
active filters; passive filters; power harmonic filters; radiofrequency interference; active AC EMI-filters; component design considerations; cost reduction; passive components; radio frequency interferences; Active filters; Bandwidth; Frequency; Impedance; Induction machines; Inductors; Interference; Inverters; Topology; Voltage;
fLanguage
English
Publisher
ieee
Conference_Titel
Power Electronics Specialists Conference, 2005. PESC '05. IEEE 36th
Conference_Location
Recife
Print_ISBN
0-7803-9033-4
Type
conf
DOI
10.1109/PESC.2005.1581879
Filename
1581879
Link To Document