DocumentCode
3114844
Title
Research on calibration of IFOG based on angle increment experiment
Author
Sun, Feng ; Lan, Haiyu ; Xia, Jianzhong ; Zu, Yue
Author_Institution
Coll. of Autom., Harbin Eng. Univ., Harbin, China
fYear
2012
fDate
5-8 Aug. 2012
Firstpage
731
Lastpage
736
Abstract
Aiming at the problem that the interferometric fiber optic gyroscope(IFOG) error coefficients such as scale factor, installation error are not stable in the calibration of strapdown inertial navigation system(SINS) caused by the turntable´s velocity error, a new calibration method based on the turntable´s angle increment experiment is proposed in this paper. Considering the turntable´s high position accuracy, the new method can eliminate the effect on the calibration parameters of IFOG caused by the turntable´s velocity error theoretically. Design the rational experiment project, then the error parameters of IFOG, such as scale factor, installation error, can be calculated, according to the error model of the IFOG. The principle of the proposed calibration is validated by the real strapdown inertial navigation system, navigation experiments using the calibration results, the experiment results show that the position accuracy using the proposed method is higher than the traditional method.
Keywords
calibration; gyroscopes; light interferometry; optical fibres; IFOG; angle increment experiment; calibration method; error coefficients; high position accuracy; installation error; interferometric fiber optic gyroscope; scale factor; strapdown inertial navigation system; velocity error; Accuracy; Angular velocity; Calibration; Clocks; Inertial navigation; Mathematical model; IFOG; angle increment experiment; calibration; velocity error;
fLanguage
English
Publisher
ieee
Conference_Titel
Mechatronics and Automation (ICMA), 2012 International Conference on
Conference_Location
Chengdu
Print_ISBN
978-1-4673-1275-2
Type
conf
DOI
10.1109/ICMA.2012.6283233
Filename
6283233
Link To Document