Study on characteristics of standing wave motors

Author

Li, Longtu ; Dong, Shuxiang ; Gui, Zhilun ; Pan, Wei ; Zhang, Xiaowen

Author_Institution

Dept. of Mater. Sci. & Eng., Tsinghua Univ., Beijing, China

fYear

1991

fDate

33457

Firstpage

713

Lastpage

716

Abstract

A standing wave rotational motor was made by using PMS-PCS-PZT ceramics. The dynamic characteristics and equivalent circuit of the motor were studied theoretically and experimentally. Using the finite element method, the vibration modes of a longitudinal-torsional coupler of a standing wave motor were analyzed. With improvement of the coupler construction, the rotational speed of the motor is increased compared with the original one. The typical values of this motor are 270 r.p.m. with no load. The diameter of the stator is 32 mm. Its resonance frequency, operation voltage and largest torque are 30 KHz, 24 V and 10 Kg-cm, respectively

Keywords

equivalent circuits; finite element analysis; lead compounds; piezoceramics; piezoelectric motors; stators; ultrasonic motors; 24 V; 30 kHz; 32 mm; PMS-PCS-PZT ceramics; PbMnO3SbO3-PbCoO3SbO3-PbZrO3TiO3; PbMnO₃SbO₃-PbCoO₃SbO₃-PZT; characteristics; equivalent circuit; finite element method; longitudinal-torsional coupler; operation voltage; resonance frequency; rotational motor; rotational speed; standing wave motors; stator diameter; torque; vibration modes; Ceramics; Coupling circuits; Dielectric measurements; Electrodes; Friction; Powders; Resonance; Rotors; Stators; Torque;

fLanguage

English

Publisher

ieee

Conference_Titel

Applications of Ferroelectrics, 1994.ISAF '94., Proceedings of the Ninth IEEE International Symposium on

Conference_Location

University Park, PA

Print_ISBN

0-7803-1847-1

Type

conf

DOI

10.1109/ISAF.1994.522468

Filename

522468