DocumentCode
3170874
Title
A 150 MHz track-and-hold amplifier in 0.35 μm CMOS
Author
Boni, A. ; Pierazzi, A.
Author_Institution
Parma Univ., Italy
fYear
1999
fDate
1999
Firstpage
90
Lastpage
93
Abstract
This abstract describes the design of a 150 MS/s track-and-hold amplifier in a 0.35 μm CMOS technology, featuring a THD compatible with 10-b operation on 1 Vpp differential input range at 3.3 V supply. This performance was achieved by means of an open-loop architecture with feed-forward compensation of the hold-mode feed-through error. The analog switch was implemented in the form of a switched source follower with strobed common-mode pull-down to achieve a short aperture time
Keywords
sample and hold circuits; 0.35 micron; 10 bit; 150 MHz; 3.3 V; CMOS; THD; analog switch; aperture time; differential input range; feed-forward compensation; hold-mode feed-through error; open-loop architecture; strobed common-mode pull-down; switched source follower; track-and-hold amplifier;
fLanguage
English
Publisher
iet
Conference_Titel
Advanced A/D and D/A Conversion Techniques and Their Applications, 1999. Third International Conference on (Conf. Publ. No. 466)
Conference_Location
Glasgow
ISSN
0537-9989
Print_ISBN
0-85296-718-7
Type
conf
DOI
10.1049/cp:19990471
Filename
793981
Link To Document