DocumentCode
3216659
Title
A wideband bandpass sigma-delta modulator for wireless applications
Author
Tabatabaei, A. ; Wooley, B.A.
Author_Institution
Center for Integrated Syst., Stanford Univ., CA, USA
fYear
1999
fDate
17-19 June 1999
Firstpage
91
Lastpage
92
Abstract
Summary form only given. This work introduces a two-path, sixth-order, switched-capacitor sigma-delta modulator capable of digitizing a 1.25 MHz signal band centered at an IF of 20 MHz. The modulator samples the input at 80 MHz and implements its constituent resonators by chopping the signal at the IF (fs/4). It thus also acts to demodulate the I and Q components of the signal and mix them to baseband. An experimental prototype of the modulator has been integrated in a 0.25 /spl mu/m CMOS technology and provides a dynamic range of 80 dB when operated from a single 2.5 V supply.
Keywords
CMOS integrated circuits; modulators; radio equipment; sigma-delta modulation; switched capacitor networks; 0.25 micron; 1.25 MHz; 2.5 V; 20 MHz; 80 MHz; ADC; CMOS technology; I component demodulation; Q component demodulation; SC sigma-delta modulator; bandpass sigma-delta modulator; sixth-order type; switched-capacitor type; two-path configuration; wideband sigma-delta modulator; wireless applications; Delta-sigma modulation; Digital modulation; Digital signal processing; Dynamic range; Multi-stage noise shaping; Receivers; Resonator filters; Sampling methods; Semiconductor device noise; Wideband;
fLanguage
English
Publisher
ieee
Conference_Titel
VLSI Circuits, 1999. Digest of Technical Papers. 1999 Symposium on
Conference_Location
Kyoto, Japan
Print_ISBN
4-930813-95-6
Type
conf
DOI
10.1109/VLSIC.1999.797246
Filename
797246
Link To Document