Title :
Ka band ∼10 MW gyro-devices: an experiment and a project
Author :
Llyakov, E. ; Krasnykh, A. ; Kulagin, I. ; Kuzikov, S. ; Lygin, V. ; Moiseev, M. ; Petelin, M. ; Zaitsev, N.
Abstract :
Summary form only given. The international program for development of electron-positron colliders needs high-power microwave sources at frequencies up to the millimeter-wave band. At the shortest microwaves, the highest powers are produced with fast-wave devices. Among them, the gyroklystron seems especially robust and reliable. As an introduction, a 30 GHz free running gyrotron operating at the H53 mode and driven with 300 kV/80 A electron beam was manufactured and tested: 12 MW/200 ns pulses were produces with 50% efficiency. The gyrotron is planned to be converted into a gyroklystron amplifier; for better coupling to the electron beam and better suppression of parasitic modes, the modulating and intermediate cavities will operate at the H51 mode. For further experiments, a test stand with a 500 kV/ 300 A/1 μs modulator is being designed and a relevant electron gun is being manufactured.
Keywords :
electron beams; electron guns; gyrotrons; klystrons; millimetre wave generation; millimetre wave tubes; modulators; 1 mus; 10 MW; 12 MW; 200 ns; 30 GHz; 300 A; 300 kV; 50 percent; 500 kV; 80 A; H51 mode operation; H53 mode operation; Ka band gyro-devices; electron beam; electron gun; electron-positron colliders; fast-wave devices; free running gyrotron; gyroklystron amplifier; high power mm-wave sources; intermediate cavities; modulating cavities; modulator; parasitic mode suppression; Electron beams; Frequency; Gyrotrons; Klystrons; Manufacturing; Microwave devices; Optical coupling; Pulse amplifiers; Robustness; Testing;
Conference_Titel :
Vacuum Electronics Conference, 2004. IVEC 2004. Fifth IEEE International
Print_ISBN :
0-7803-8261-7
DOI :
10.1109/IVELEC.2004.1316198