The spatial distribution and electrical parameters of partial discharges in polyethylene insulation during ageing

Author

Morshuis, P.H.F. ; Kreuger, F.H.

Author_Institution

High Voltage Lab., Delft Univ. of Technol., Netherlands

fYear

1992

fDate

22-25 Jun 1992

Firstpage

209

Lastpage

214

Abstract

The change of discharge parameters obtained from large bandwidth electrical and optical measurements is related to ageing phenomena in polyethylene voids. Discharge-pulse shape, ignition voltage, and spatial distribution were monitored in disc-shaped polyethylene voids for 100 hrs. Optical and electrical results are related to the mechanism of the discharge and the dimensions of the void. Primarily discharge pulse height, discharge pulse width, and discharge repetition rate are important parameters describing the ageing process. These parameters changed drastically during ageing as layers of discharge by-products were deposited on the void surfaces and pits were formed. The creation of pits was linked to the occurrence of a discharge regime with minute pulses of high repetition rate and a decreasing ignition voltage. These minute discharges were therefore regarded as a sign of advanced degradation of the dielectric

Keywords

ageing; insulation testing; organic insulating materials; partial discharges; polymers; ageing; disc-shaped polyethylene voids; discharge parameters; discharge pulse height; discharge pulse width; discharge repetition rate; electrical parameters; ignition voltage; partial discharges; polyethylene insulation; spatial distribution; Aging; Bandwidth; Electric variables measurement; Ignition; Monitoring; Optical pulses; Polyethylene; Shape; Space vector pulse width modulation; Voltage;

fLanguage

English

Publisher

ieee

Conference_Titel

Conduction and Breakdown in Solid Dielectrics, 1992., Proceedings of the 4th International Conference on

Conference_Location

Sestri Levante

Print_ISBN

0-7803-0129-3

Type

conf

DOI

10.1109/ICSD.1992.224990

Filename

224990