Abstract :
A novel Monolithic Piezoelectric Sensor (MPS) is presented for the detection of physical, chemical and biochemical measurands. This new sensor overcomes specific deficiencies associated with the Quartz Crystal Microbalance (QCM) while still employing a well-characterized, temperature-stable Thickness-Shear Mode (TSM). The sensor is applicable to both gaseous and liquid phase measurements; however, the principal benefit of the MPS is in liquid phase measurements. In these applications, it offers the ability to operate simple, yet stable, oscillator circuits in relatively viscous media. The proposed sensor structure is based on a two-pole coupled resonator, in which mechanical coupling between the electrical input and output determines the electrical properties. This structure offers approximately 180° of phase shift over its 3 dB bandwidth with nominally 180° of insertion phase at the symmetric resonant frequency and approximately 0° of insertion phase at the antisymmetric resonant frequency. Simple oscillator circuits may be implemented which measure the symmetric frequency, the antisymmetric frequency or the nominal center frequency. This novel MPS sensor structure should accelerate the commercialization of piezoelectric sensor technology, particularly in such areas as chemical, biochemical and environmental testing
Keywords :
crystal resonators; electric sensing devices; equivalent circuits; piezoelectric transducers; antisymmetric resonant frequency; equivalent circuit; gaseous phase measurements; insertion phase; liquid phase measurements; mechanical coupling; monolithic piezoelectric sensor; nominal center frequency; simple oscillator circuits; symmetric resonant frequency; temperature-stable thickness-shear mode; two-pole coupled resonator; Biosensors; Chemical and biological sensors; Chemical sensors; Chemical technology; Coupling circuits; Gas detectors; Oscillators; Phase measurement; Resonant frequency; Temperature sensors;
