Title :
Microvaristors for Thick-film and LTCC microcircuits
Author :
Dziedzic, Andrzej ; Mis, Edward ; Mielcarek, Witold
Author_Institution :
Fac. of Microsyst. Electron. & Photonics, Wroclaw Univ. of Technol.
Abstract :
Microelectronic circuits need effective protection against electrical overvoltages and very often ZnO-based varistors are used. Direct fabrication of such elements together with other thick-film or LTCC components is highly desirable. Possibility of a lowering varistor sintering temperature to the range of 850deg C-950degC, typical of these technologies should be investigated. ZnO-based varistor ink was prepared and varistors were fabricated on alumina and LTCC substrates. Different electrodes metallurgy and firing profiles were used. Basic electrical properties and stability were determined and correlated with technology
Keywords :
ceramics; sintering; thick film circuits; varistors; 850 to 950 C; LTCC substrates; ZnO; alumina; electrical overvoltages; electrical properties; electrodes metallurgy; firing profiles; microelectronic circuits; microvaristors; sintering; thick film; Circuits; Electrodes; Fabrication; Firing; Ink; Microelectronics; Stability; Surge protection; Temperature distribution; Varistors;
Conference_Titel :
Electronics Systemintegration Technology Conference, 2006. 1st
Conference_Location :
Dresden
Print_ISBN :
1-4244-0552-1
Electronic_ISBN :
1-4244-0553-x
DOI :
10.1109/ESTC.2006.280127
