DocumentCode :
3231066
Title :
Exploring high-speed low-power hybrid arithmetic units at scaled supply and adaptive clock-stretching
Author :
Ghosh, Swaroop ; Roy, Kaushik
Author_Institution :
Purdue Univ., West Lafayette
fYear :
2008
fDate :
21-24 March 2008
Firstpage :
635
Lastpage :
640
Abstract :
Meeting power and performance requirement is a challenging task in high speed ALUs. Supply voltage scaling is promising because it reduces both switching and active power but it also degrades robustness. Recently, researchers have proposed novel design technique for linear time complexity adders that maintain high yield and high clock frequency even at scaled supply voltage. The idea is based on the fact that the critical paths of arithmetic units are exercised rarely. The technique (a) predicts the set of critical paths, (b) reduces the supply voltage to operate non-critical paths at rated frequency, and; (c) avoids possible delay failures in the critical paths by dynamically stretching the clock period (to say, two-cycles assuming all standard operations are single-cycle), when they are activated. This allows circuits to operate at scaled supply with minimal performance degradation. The off-critical paths operate in single clock cycle while critical paths are operated in stretched clock period. Different classes of adders may benefit differently using such technique. For example, ripple carry adders can reap the benefits more effectively than say, tree adders (balanced paths). However, logic modification may ease the application of supply voltage scaling. In this paper, we explore various arithmetic units for possible use in high speed, high yield ALU design at scaled supply voltage with variable latency operation. We demonstrate that careful logic optimization of the existing arithmetic units indeed make them further suitable for supply voltage scaling with tolerable area overhead Simulation results on different adder and multiplier topologies in BPTM 70nm technology show 18-60% extra improvement in power with only 2-8% increase in die-area at iso-yield We also extend our studies to design low power and high yield multipliers. These optimized low power datapath units can be used to construct low power and robust ALU that can operate at high clock frequency with m- inimal performance degradation due to occasional clock stretching.
Keywords :
adders; computational complexity; digital arithmetic; network topology; power aware computing; adaptive clock-stretching; adder topologies; high speed ALU; high-speed low-power hybrid arithmetic units; linear time complexity adders; logic modification; multiplier topologies; off-critical paths; supply voltage scaling; Adders; Arithmetic; Circuits; Clocks; Degradation; Delay; Frequency; Logic; Robustness; Voltage; Adaptive Clock Stretching; Hybrid Adder; Low Power; Process Tolerant; Supply Voltage Scaling;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Design Automation Conference, 2008. ASPDAC 2008. Asia and South Pacific
Conference_Location :
Seoul
Print_ISBN :
978-1-4244-1921-0
Electronic_ISBN :
978-1-4244-1922-7
Type :
conf
DOI :
10.1109/ASPDAC.2008.4484029
Filename :
4484029
Link To Document :
بازگشت