DocumentCode :
3275971
Title :
Simulation of Electroluminescence using a Bipolar Recombination Model
Author :
Lewin, P.L. ; Dodd, S.J. ; Ariffin, A. Mohd
Author_Institution :
The Tony Davies High Voltage Laboratory, School of Electronics and Computer Science, University of Southampton, Southampton, SO17 1BJ, United Kingdom. E-mail: pll@ecs.soton.ac.uk
fYear :
2007
fDate :
8-13 July 2007
Firstpage :
15
Lastpage :
18
Abstract :
A dynamic bipolar charge recombination model originally developed to explain charge injection and electroluminescent (EL) behaviour of pin-plane polymeric resin samples under ac stress has been adapted to allow the simulation of EL from polyethylene films sandwiched in a plane-plane electrode system. The model is described and obtained results compared with experimental measurements. Comparison reveals that there is good agreement between the model and experimental data, indicating that under ac stress and in this case EL may be entirely due to charge injection and bipolar recombination.
Keywords :
Cameras; Charge measurement; Current measurement; Electrodes; Electroluminescence; Phase detection; Phase measurement; Polymer films; Space charge; Spontaneous emission;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Solid Dielectrics, 2007. ICSD '07. IEEE International Conference on
Conference_Location :
Winchester, UK
Print_ISBN :
1-4244-0750-8
Electronic_ISBN :
1-4244-0751-6
Type :
conf
DOI :
10.1109/ICSD.2007.4290741
Filename :
4290741
Link To Document :
بازگشت