Influence of additives with low melting temperatures on structure, microstructure, phase transitions and dielectric properties of BiScO3-PbTiO3 ceramics

Author

Politova, E.D. ; Kaleva, G.M. ; Mosunov, A.V. ; Sadovskaya, N.V. ; Segalla, A.G.

Author_Institution

Karpov Inst. of Phys. Chem., Moscow, Russia

fYear

2012

fDate

9-13 July 2012

Firstpage

1

Lastpage

4

Abstract

Ceramic solid solutions on base of 0.36BiScO₃ -0.64PbTiO₃ compositions doped by additives Bi₂O₃, Ni₂O₃, MnO₂, and LiF with low melting temperatures were prepared by the solid state reaction method. Phase formation, microstructure and dielectric properties of modified ceramics were studied. Dense single phase samples characterized by the average grain size varied from submicron till tens mm were obtained at lower temperatures. Influence of additives on dielectric properties and on the effects of dielectric relaxation was revealed.

Keywords

additives; bismuth compounds; dielectric relaxation; doping; ferroelectric ceramics; ferroelectric transitions; grain size; lead compounds; melting; permittivity; solid solutions; BiScO₃-PbTiO₃; additive doping; average grain size; ceramic solid solutions; dense single phase samples; dielectric properties; dielectric relaxation; low melting temperatures; microstructure; phase formation; phase transitions; solid state reaction method; structural properties; Additives; Ceramics; Dielectrics; Electronic mail; Microstructure; Solids; Temperature; BiScO3-PbTiO3 ceramics; ferroelectric phase transitions; low melting additives;

fLanguage

English

Publisher

ieee

Conference_Titel

Applications of Ferroelectrics held jointly with 2012 European Conference on the Applications of Polar Dielectrics and 2012 International Symp Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials (ISAF/ECAPD/PFM), 2012 Intl Symp

Conference_Location

Aveiro

Print_ISBN

978-1-4673-2668-1

Type

conf

DOI

10.1109/ISAF.2012.6297731

Filename

6297731