Title :
Reconfigurable beam shaping antenna with Wilkinson Power Divider at 5.8GHz
Author :
Ali, M.T. ; Kamarudin, M.R. ; Tan, M. N Md ; Rahman, T.A.
Author_Institution :
Wireless Commun. Centre, Univ. Teknol. Malaysia, Skudai
Abstract :
This paper presents a reconfigurable multiple element microstrip rectangular linear array antenna integrated with radio frequency (RF) switches. The corporate feed design concept is used to excite the linear array antenna that consists of 8 elements of rectangular patches at 5.8 GHz. Two PIN diode switches were deployed at the feeding line to activate the two arrays of patches that is located on the left and right side of the antenna structure. The behavior of the reconfigurable multiple element linear antenna array system has been investigated with respect to beam shaping characteristic. The comparisons of the performance between two structures, with Wilkinson power divider (WPD) and without WPD are discussed in this paper. Two different beam patterns were achieved through the reconfigurable antenna at different number of elements design that incorporates with PIN diode switches and modified WPD concept. The simulations and the measurement results for 4 and 8 elements array antenna structure are presented.
Keywords :
antenna feeds; antenna radiation patterns; linear antenna arrays; microstrip antenna arrays; microwave antenna arrays; microwave switches; p-i-n diodes; power dividers; PIN diode switches; Wilkinson power divider; antenna structure; beam patterns; corporate feed design; frequency 5.8 GHz; linear array antenna; multiple element microstrip rectangular linear array antenna; radio frequency switches; reconfigurable beam shaping antenna; Antenna feeds; Dipole antennas; Inductors; Linear antenna arrays; Microstrip antenna arrays; Microstrip antennas; Power dividers; Radio frequency; Switches; Switching circuits; Corporate feed design; Wilkinson power divider and reconfigurable antenna; radio frequency;
Conference_Titel :
RF and Microwave Conference, 2008. RFM 2008. IEEE International
Conference_Location :
Kuala Lumpur
Print_ISBN :
978-1-4244-2866-3
Electronic_ISBN :
978-1-4244-2867-0
DOI :
10.1109/RFM.2008.4897375