Title :
Nail pulling resistance of substitute lumbers molded from fiber wastes
Author :
Hatta, Saki ; Kimura, Teruo ; Gonno, Hirohisa ; Kadokura, Kenzo
Author_Institution :
Kyoto Inst. of Technol., Japan
Abstract :
The compression molding of porous material such as substitute lumber was performed by using waste fibers (rags). Especially, attention was focused upon the molding of packing lumber and the pulling resistance of nails was discussed by comparing it with that of commercial lumber such as New Zealand pine tree. The mechanism of the pulling resistance of nails for the molded lumber was cleared from the experimental results.
Keywords :
compression moulding; compressive strength; nailing; porous materials; recycling; textile fibres; wood products; New Zealand pine tree; compression molding; fiber rags; fiber wastes; lumber packing; molded lumber; nail pulling resistance; porous material; substitute lumber molding; Environmental factors;
Conference_Titel :
Environmentally Conscious Design and Inverse Manufacturing, 2003. EcoDesign '03. 2003 3rd International Symposium on
Conference_Location :
Tokyo, Japan
Print_ISBN :
0-7803-8590-x
DOI :
10.1109/ECODIM.2003.1322685
