Title :
Petroleum sludge stabilization and solidification An alternative treatment using ordinary Portland cement and rice husk ash
Author :
Zain, Asna Mohd ; Mahmud, Hilmi ; Shaaban, Md Ghazaly
Author_Institution :
Civil Eng. Dept., Univ. of Malaya, Kuala Lumpur, Malaysia
Abstract :
Industrial activities generate significant amount of hazardous waste from refinery, chemical manufacturing, cosmetic, drug and pharmaceutical industry. Petroleum sludge is immobilized using ordinary Portland cement to stabilize and solidify the contaminant in the sludge as an alternative treatment for final disposal of the waste. The waste has significant amount of organic material which normally interfere with the cement hydration process. A way to improve is by addition of cement replacement material. Rice husk ash (RHA) was added at 5, 10 and 15% cement replacement. The 5% RHA exhibited the best performance with regards to unconfined compressive of 24.9 N/mm2. The strength is better than the sludge cement of 19.2 N/mm2. Porosity was found to increase with increasing RHA content. The surface morphology of solidified cement with voids was found to be in the range of 10 to 15 μm for 15% RHA. RHA addition promotes carbonation. Its high silica content reacts with CO2 to form calcite and silica gel.
Keywords :
calcium compounds; cements (building materials); compressive strength; crops; gels; industrial waste; petroleum; sludge treatment; solidification; solvation; Portland cement; calcite; carbonation; cement hydration process; compressive strength; contaminant; hazardous waste; organic material; petroleum sludge solidification; petroleum sludge stabilization; porosity; rice husk ash; silica gel; sludge cement; Compounds; Correlation; Europe; Surface morphology; Surface treatment; Sustainable development; Variable speed drives; petroleum; porosity; sludge; solidification; stabilization; strength;
Conference_Titel :
Chemical, Biological and Environmental Engineering (ICBEE), 2010 2nd International Conference on
Conference_Location :
Cairo
Print_ISBN :
978-1-4244-8748-6
Electronic_ISBN :
978-1-4244-8749-3
DOI :
10.1109/ICBEE.2010.5650631