Four-step commutation strategy of PWM rectifier of converter without DC link components for induction motor drive

Author

Muroya, Mitsuhiro ; Shinohara, Katsuji ; Iimori, Kenichi ; Sako, Hiromi

Author_Institution

Kagoshima Nat. Coll. of Technol., Japan

fYear

2001

fDate

2001

Firstpage

770

Lastpage

772

Abstract

In this paper, we describe a method of generating gate signals of the PWM rectifier section of the converter without DC link components, which is able to remove snubber circuits. In the snubber circuits, losses have been dissipated every time the switches of the rectifier section are turned on and off. The commutation strategy of the proposed method consists of four steps during the switching process. The proposed method is verified by experimental tests on an induction motor drive. It is concluded that it decreases losses in the rectifier section

Keywords

PWM power convertors; commutation; induction motor drives; losses; rectifying circuits; PWM rectifier; commutation strategy; converter; four-step commutation strategy; gate signals generation; induction motor drive; losses; rectifier section losses decrease; snubber circuits removal; switching process; Circuit testing; Commutation; DC generators; Pulse width modulation; Pulse width modulation converters; Rectifiers; Signal generators; Snubbers; Switches; Switching circuits;

fLanguage

English

Publisher

ieee

Conference_Titel

Electric Machines and Drives Conference, 2001. IEMDC 2001. IEEE International

Conference_Location

Cambridge, MA

Print_ISBN

0-7803-7091-0

Type

conf

DOI

10.1109/IEMDC.2001.939403

Filename

939403