High-efficiency space and terrestrial multijunction solar cells through bandgap control in cell structures

Using the energy bandgap of semiconductors as a design parameter is critically important for achieving the highest efficiency multijunction solar cells. The bandgaps of lattice-matched semiconductors that are most convenient to use are rarely those which would result in the highest theoretical efficiency. For both the space and terrestrial solar spectra, the efficiency of 3-junction GaInP/GaAs/Ge solar cells can be increased by a lower bandgap middle cell, as for GaInAs middle cells, as well as by using higher bandgap top cell materials. Wide-bandgap and indirect-gap materials used in parasitically absorbing layers such as tunnel junctions help to increase transmission of light to the active cell layers beneath. Control of bandgap in such cell structures has been instrumental in achieving solar cell efficiencies of 29.7% under the AMO space spectrum (0.1353 W/cm², 28°C) and 34% under the concentrated terrestrial spectrum (AM1.5G, 150-400 suns, 25°C), the highest yet achieved for solar cells built on a single substrate.