Electrical properties of low-density polyethylene prepared by different manufacturing process

In order to investigate the influence of the manufacturing process on the electrical properties, we used two kinds of low density polyethylene prepared using a metallocene catalyst (mt), linear-low density polyethylene prepared using a Ziegler catalyst (LL) and low density polyethylene by a high-pressure process (LD). mL has the narrowest composition and molecular-weight distributions. We measured the DC and impulse breakdown strengths and current densities at 30°C, 60°C and 90°C. mL had a higher breakdown strength and a lower high-field current than LD and LL. These results were discussed from the point of manufacturing processes