A wideband elliptic printed dipole antenna array

Author

Tu, Zhen ; Zhang, Guang-Qiu ; Zhou, Dong-Fang ; Xing, Feng

Author_Institution

Commun. Eng. Dept., Zhen Zhou Inf. Sci. & Technol. Inst., Zheng Zhou, China

fYear

2011

fDate

1-3 Nov. 2011

Firstpage

68

Lastpage

70

Abstract

An 8-element wideband printed dipole antenna array is analyzed and successfully implemented. The element used is double-sided elliptic printed dipole fed by a balanced transmission line. A wide-band balun from a microstrip feeding line to a balanced transmission line for the array was designed and implemented. Good agreement between the simulated and measured results of the array was observed. In the frequency band l-2.64GHz, the measured VSWR is below 2.0. In the frequency band 1-2.5GHz, the designed array has directional radiation pattern and its gain is between 14dB and 17.3dB. So the relative bandwidth which can meet both impedance and radiation characteristic requirements is 85.7%.

Keywords

antenna feeds; antenna radiation patterns; baluns; broadband antennas; dipole antenna arrays; microstrip antenna arrays; 8-element antenna array; balanced transmission line; dipole antenna array; directional radiation pattern; double-sided elliptic printed dipole fed; frequency 1 GHz to 2.64 GHz; microstrip feeding line; printed antenna array; wideband balun; wideband elliptic antenna array; Antenna measurements; Arrays; Broadband antennas; Dipole antennas; Transmission line measurements; Wideband; dipole array; planar array; printed array; wideband array;

fLanguage

English

Publisher

ieee

Conference_Titel

Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE), 2011 IEEE 4th International Symposium on

Conference_Location

Beijing

Print_ISBN

978-1-4244-8265-8

Type

conf

DOI

10.1109/MAPE.2011.6156195

Filename

6156195