Title :
Analysis of the upper cross beam of a forging hydraulic press
Author :
Shanmei, Liao ; Zhichen, Zhang ; Shijie, Wang ; Linzhi, Liu ; Lei, Zhang ; Guosheng, Lv
Author_Institution :
Sch. of Mech. & Electron. Eng., Tianjin Polytech. Univ., Tianjin, China
Abstract :
According to the structural characteristics of the upper cross beam on a particular 20MN forging hydraulic press, the beam´s strength is checked by the method of materials mechanics. Then the solid modeling is created by the PROE, and analysis is carried out by use of ANSYS software to study the stress and displacement under the nominal pressure. The results show that the finite element method is reliable and a reasonable structure design of the beam is gotten. At the same time, further optimization is suggested.
Keywords :
Automation; Conducting materials; Costs; Electronics industry; Finite element methods; Gravity; Industrial electronics; Mechatronics; Solid modeling; Stress; ANSYS; finite element method; hydrilic press; material mechanical method; static analysis; upper cross beam;
Conference_Titel :
Industrial Mechatronics and Automation (ICIMA), 2010 2nd International Conference on
Conference_Location :
Wuhan, China
Print_ISBN :
978-1-4244-7653-4
DOI :
10.1109/ICINDMA.2010.5538169
