Automated fault isolation system on low voltage distribution automation system

Author

Ahmed, M.M. ; Soo, W.L.

Author_Institution

Dept. of Electr. Eng., UTeM, Malacca

fYear

2008

fDate

21-24 April 2008

Firstpage

1

Lastpage

6

Abstract

This automated fault isolation system was integrated into the customer side distribution system of 415/240V by using the Tenaga Nasional Berhad (TNB) distribution system. Supervisory control and data acquisition (SCADA) based remote terminal unit (RTU) along power line communication (PLC) system is used for monitoring, reporting and controlling purposes. Open loop distribution system is the distribution configuration system used as TNB distribution system. It is the first DAS research work done on customer side substation for operating and controlling between the consumer side system and the substation.

Keywords

SCADA systems; carrier transmission on power lines; fault diagnosis; power distribution faults; RTU; SCADA; Tenaga Nasional Berhad distribution system; automated fault isolation system; consumer side system; customer side distribution system; distribution configuration system; low voltage distribution automation system; open loop distribution system; power line communication; remote terminal unit; supervisory control and data acquisition; Automation; Communication system control; Control systems; Low voltage; Open loop systems; Power line communications; Programmable control; Remote monitoring; SCADA systems; Substations; Counter; Fault Isolation; Open Loop System; Service Substation;

fLanguage

English

Publisher

ieee

Conference_Titel

Transmission and Distribution Conference and Exposition, 2008. T&D. IEEE/PES

Conference_Location

Chicago, IL

Print_ISBN

978-1-4244-1903-6

Electronic_ISBN

978-1-4244-1904-3

Type

conf

DOI

10.1109/TDC.2008.4517217

Filename

4517217