Vibration analysis of a damaged dog bone model

Author

Pidaparti, R.M.V. ; Yue Lin

Author_Institution

Dept. of Mech. Eng., Purdue Univ., Indianapolis, IN, USA

fYear

1996

fDate

29-31 Mar 1996

Firstpage

487

Lastpage

490

Abstract

Finite element simulation was carried out on a dog bone model assuming an elliptical bone cross-section. The analysis was carried out for both undamaged and damaged cases with longitudinal as well as cross-sectional microcracks using a general purpose finite element software (Abaqus). It was found that as the damage parameter increased, the bending stiffness decreased. For the same damage parameter, longitudinal damage was more severe than the cross-sectional damage in the case of bending considered in this study. The same results were obtained in the mode shape studies

Keywords

biomechanics; bone; elasticity; finite element analysis; physiological models; vibrations; Abaqus; bending; bone biomechanics; cross-sectional damage; cross-sectional microcracks; damage parameter; damaged dog bone model; elliptical bone cross-section; general purpose finite element software; longitudinal damage; mode shape studies; vibration analysis; Bones; Finite element methods; Frequency estimation; Geometry; In vivo; Material properties; Resonant frequency; Shape; Solid modeling; Vibrations;

fLanguage

English

Publisher

ieee

Conference_Titel

Biomedical Engineering Conference, 1996., Proceedings of the 1996 Fifteenth Southern

Conference_Location

Dayton, OH

Print_ISBN

0-7803-3131-1

Type

conf

DOI

10.1109/SBEC.1996.493283

Filename

493283