DocumentCode :
3412493
Title :
Design of an X-band microstrip patch antenna with enhanced bandwidth
Author :
Islam, Md Minarul ; Islam, Mohammad Tariqul ; Faruque, Mohammad Rashed Iqbal ; Hueyshin, W.
Author_Institution :
Fac. of Eng. & Built Environ., Univ. Kebangsaan Malaysia, Bangi, Malaysia
fYear :
2013
fDate :
19-21 Dec. 2013
Firstpage :
313
Lastpage :
317
Abstract :
In this paper, an X-band microstrip patch antenna has been presented with enhanced bandwidth. The proposed antenna is designed on 40 mm×40mm printed circuit board and is excited by microstrip line. Commercially available High Frequency Structural Simulator (HFSS) is adopted in this study This antenna is composed of rectangular and circular slots to generate two resonances and to increase bandwidth in the desired band. Return loss -17.14 dB and -14.29 dB are obtained below -10 dB in the desired X-band (8GHz-12GHz). It has achieved stable radiation efficiency 78.85% with average peak gain 4.31 dBi in the operating frequency band. The proposed antenna has an impedance bandwidth 1.59 GHz. The proposed X-band patch antenna is discussed and presented in detail.
Keywords :
microstrip antennas; microstrip lines; microwave antennas; printed circuits; HFSS; X-band microstrip patch antenna; X-band patch antenna; bandwidth 1.59 GHz; circular slot; enhanced bandwidth; frequency 8 GHz to 12 GHz; high frequency structural simulator; loss -14.29 dB; loss -17.14 dB; microstrip line; printed circuit board; rectangular slot; Antenna radiation patterns; Bandwidth; Microstrip; Microstrip antennas; Patch antennas; Slot antennas; FEM; FR4 substrate material; X-band; microstrip line;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Advances in Electrical Engineering (ICAEE), 2013 International Conference on
Conference_Location :
Dhaka
Print_ISBN :
978-1-4799-2463-9
Type :
conf
DOI :
10.1109/ICAEE.2013.6750355
Filename :
6750355
Link To Document :
بازگشت