An active RF-ID tag for container management

Author

Kim, Jin-Sup ; Byeon, Sang-Gi ; Choi, Won-kyu ; Kang, Yong-Cheol ; Lee, Eun-Ju

Author_Institution

Wireless Commun. Res. Center, Korea Electron. Technol. Inst., South Korea

Volume

5

fYear

2005

fDate

4-7 Dec. 2005

Abstract

In this paper, the RF-ID tag for container management has been designed, fabricated and analyzed. The active RF-ID tag consists of Rx part, Tx part and planar inverted-F antenna (PIFA). We suggest an active RF-ID tag for container management. Also, planar inverted-F antenna useful in metal container is suggested. We have designed the RF-ID tag using EM and circuit simulation tools. According to the measured results, the transmitting power of RF-ID tag was 10mW. The frequency deviation is ± 50kHz and data rate is 27.7 kbps.

Keywords

active antennas; circuit simulation; containers; planar inverted-F antennas; radiofrequency identification; 10 mW; 27.7 kbit/s; PIFA; Rx part; Tx part; active RF-ID tag; circuit simulation tool; container management; metal container; planar inverted-F antenna; Antenna measurements; Bandwidth; Circuit simulation; Consumer electronics; Containers; Frequency; Optical modulation; Radiofrequency identification; Technical Activities Guide -TAG; Wireless communication; PIFA; RF-ID; Tag;

fLanguage

English

Publisher

ieee

Conference_Titel

Microwave Conference Proceedings, 2005. APMC 2005. Asia-Pacific Conference Proceedings

Print_ISBN

0-7803-9433-X

Type

conf

DOI

10.1109/APMC.2005.1607024

Filename

1607024