The suggestion for CFS CMOS buffer

Two recent papers, one by Huang et al. (1996) and the other by Cheng et al. (1997), on the driver buffer are commented on. The feedback-controlled split-path CMOS buffer (FS) claims that the 4-split-path buffer can reduce the power and power-delay product. But the voltage of the gates in the output inverter stage is not enough to turn-off the PMOS transistor and the NMOS transistor. Due to this, charge-recovery must be used. The charge-transfer feedback-controlled split-path (CFS) CMOS buffer that has high-speed low-power performance by using transfer of the charge stored in the split output-stage driver to the output node. Thus the power-delay product can be reduced greatly by combining the technology described in the former two papers. The HSPICE simulation results show that the power-delay product of the suggested CMOS buffer is reduced by 20% to 40% in comparison to the conventional CMOS tapered buffer at 100 MHz operation frequency at heavy capacitive load