DocumentCode
3429257
Title
A 1.2 V rail-to-rail switched buffer
Author
Ferri, Giuseppe ; Costa, Alfredo ; Baschirotto, Andrea
Author_Institution
Dipt. di Ingegneria Elettrica, l´´Aquila Univ., Italy
Volume
1
fYear
1998
fDate
1998
Firstpage
45
Abstract
A CMOS low-voltage (1.2 V) switched buffer to be used as input stage in switched-opamp circuits is presented. The circuit is based on the use of an op-amp featuring rail-to-rail input and output swing with constant transconductance (gm) over the input common mode voltage. The circuit operates from a single 1.2 V, consuming about 0.6 mW. The total harmonic distortion is about -61 dB for 5 MHz clock frequency with 2 Vpp input amplitude
Keywords
CMOS analogue integrated circuits; buffer circuits; low-power electronics; operational amplifiers; switched networks; 0.6 mW; 1.2 V; 5 MHz; CMOS LV switched buffer; THD; constant transconductance; input common mode voltage; low-voltage buffer; op amp input stage; rail-to-rail switched buffer; switched-opamp circuits; total harmonic distortion; CMOS technology; Clocks; Low voltage; Operational amplifiers; Rail to rail inputs; Rail to rail outputs; Switches; Switching circuits; Threshold voltage; Transconductance;
fLanguage
English
Publisher
ieee
Conference_Titel
Electronics, Circuits and Systems, 1998 IEEE International Conference on
Conference_Location
Lisboa
Print_ISBN
0-7803-5008-1
Type
conf
DOI
10.1109/ICECS.1998.813268
Filename
813268
Link To Document