DocumentCode :
3432795
Title :
PIN-FET receiver design for optical fibre digital PPM systems
Author :
Cryan, R.A. ; Unwin, R.T.
Author_Institution :
Manchester Metropolitan Univ., UK
fYear :
1992
fDate :
16-20 Nov 1992
Firstpage :
1028
Abstract :
This paper considers system performance with a causal noise whitening filter and shows that at 50 Mbit/s the sensitivity is within 0.5 dB of ideal detection and 6.7 dB better than PCM. A 565 Mbit/s system is also considered and it is demonstrated that to allow operation at this bit-rate the cut-off frequency of the noise whitening filter must be greater than the noise corner frequency so as to reduce pulse dispersion. The results predict that the PIN-FET PPM system should offer an improvement of typically 6 dB over an equivalent PCM system
Keywords :
field effect transistor circuits; optical modulation; optical receivers; p-i-n photodiodes; preamplifiers; pulse position modulation; 50 Mbit/s; 565 Mbit/s; PIN-FET receiver design; causal noise whitening filter; cut-off frequency; optical fibre digital PPM systems; pulse dispersion; sensitivity; system performance; Cutoff frequency; Noise reduction; Optical design; Optical fiber dispersion; Optical fiber filters; Optical fibers; Optical noise; Optical receivers; Phase change materials; System performance;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Singapore ICCS/ISITA '92. 'Communications on the Move'
Print_ISBN :
0-7803-0803-4
Type :
conf
DOI :
10.1109/ICCS.1992.255106
Filename :
255106
Link To Document :
بازگشت