A radiating element for an active airborne antenna

Author

Arnold, E.

Author_Institution

Daimler Chrysler Aerosp., Ulm, Germany

Volume

1

fYear

1999

fDate

11-16 July 1999

Firstpage

134

Abstract

Within the Airborne Multirole Solid state Active Radar (AMSAR) project an X-band waveguide radiating element was developed. The radiating element was completely dimensioned by computer simulation. Subsequently, 135 radiating elements were manufactured for a test array. The radiating element was designed to have 2 polarisations with more than 20 % frequency bandwidth, low loss (<0.5 dB), wide scan range (0/spl les//spl thetav//spl les/60/spl deg/), low weight and small length (<20 mm).

Keywords

active antenna arrays; airborne radar; electromagnetic wave polarisation; radar antennas; scanning antennas; waveguide antenna arrays; waveguide components; AMSAR project; X-band waveguide radiating element; active airborne antenna; airborne multirole solid state active radar; computer simulation; dual polarisation; frequency bandwidth; low loss; low weight; radiating element; scan impedance; small length; test array; wide scan range; Apertures; Computer simulation; Dielectric materials; Manufacturing; Metallization; Plastics; Polarization; Resistors; Waveguide components; Waveguide transitions;

fLanguage

English

Publisher

ieee

Conference_Titel

Antennas and Propagation Society International Symposium, 1999. IEEE

Conference_Location

Orlando, FL, USA

Print_ISBN

0-7803-5639-x

Type

conf

DOI

10.1109/APS.1999.789100

Filename

789100