Notice of RetractionShaping of continuous carbon fibre reinforced 5A06 composites by vacuum anti-pressure infiltration technology

Notice of Retraction

After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE´s Publication Principles.

We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper.

The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org.

This paper studies key parameters of continuous carbon fibre reinforced 5A06 composites technique by the vacuum anti-pressure infiltration. Production steps of composites are generally described as follows: preform manufacturing, liquid metal infiltration by gas pressure and finishing. Results illustrate that besides the remained ratio of fibre tensile strength, the compression strength of fiber preform is remarkably influenced by temperature and mechanical properties of composites. When preform temperature decreased from 680°C to 620°C and the fibres are coated C-Al₂O₃ layer, the tensile strength of the composites increased from 69MPa to 651MPa.