Modelling and identification of a current-fed commutatorless machine for digital simulation and control

Author

Flores, F. Pazos ; Rognon, J.P. ; Roye, D.

Author_Institution

Fac. de Ingenieria, Univ. Autonoma de San Luis Potosi, Mexico

fYear

1994

fDate

21-25 Aug 1994

Firstpage

173

Lastpage

178

Abstract

This paper describes joint use of a simulation program (MC2-machine converter control) on a digital computer and an experimental bench including a commutatorless machine (CLM) with salient poles and configurable damper cage for identification and modelling of this system as well as designing the machine control loops. The experimental bench tested in the laboratory uses a four-pole synchronous motor with main parameters 10 kVA, 220 V, 27 A, 50 Hz, and 1500 RPM. A microcomputer assumes all control and regulation functions

Keywords

digital control; digital simulation; electric machine analysis computing; identification; machine control; machine theory; microcomputer applications; power convertors; simulation; synchronous motors; 10 kVA; 220 V; 27 A; 50 Hz; MC2 simulation program; configurable damper cage; control; current-fed commutatorless machine; digital computer; digital simulation; four-pole synchronous motor; identification; machine control loops; machine converter control; modelling; salient poles; Commutation; Computational modeling; Computer simulation; Damping; Digital control; Laboratories; Machine control; Shock absorbers; Synchronous motors; Testing;

fLanguage

English

Publisher

ieee

Conference_Titel

Power Electronics Congress, 1994. Technical Proceedings. CIEP '94., 3rd International

Conference_Location

Puebla

Print_ISBN

0-7803-2068-9

Type

conf

DOI

10.1109/CIEP.1994.494429

Filename

494429