• DocumentCode
    3445196
  • Title

    Four point bend testing of calcium phosphate coatings [dental and orthopedic implants]

  • Author

    Haman, Jeannie D. ; Chittur, Krishnan K. ; Crawmer, Daryl E. ; Lucas, Linda C.

  • Author_Institution
    Alabama Univ., Birmingham, AL, USA
  • fYear
    1997
  • fDate
    4-6 Apr 1997
  • Firstpage
    305
  • Lastpage
    308
  • Abstract
    Calcium phosphate coatings produced by both high velocity oxy-fuel thermal spraying and plasma spraying were subjected to four point bend mechanical testing to determine the bond strength of the coatings to the Ti-6Al-4V substrates. These results were then compared to the bond strengths of these coatings as obtained by ASTM C633 tensile testing
  • Keywords
    adhesion; calcium compounds; mechanical testing; plasma arc spraying; prosthetics; spray coating techniques; tensile testing; ASTM C633 tensile testing; Ca3(PO4)2; Ti-6Al-4V substrates; Ti-Al-V; bond strength; calcium phosphate coatings; dental implants; four point bend mechanical testing; four point bend testing; high velocity oxy-fuel thermal spraying; orthopedic implants; plasma spraying; Bonding; Calcium; Coatings; Implants; In vivo; Powders; Tensile stress; Testing; Thermal spraying; X-ray scattering;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Biomedical Engineering Conference, 1997., Proceedings of the 1997 Sixteenth Southern
  • Conference_Location
    Biloxi, MS
  • ISSN
    1086-4105
  • Print_ISBN
    0-7803-3869-3
  • Type

    conf

  • DOI
    10.1109/SBEC.1997.583294
  • Filename
    583294
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=3445196