Title :
Distorting improving method for threephases full bridge converter based switched reluctance motor drive system
Author :
Tungpimolrut, Kanokvate ; Kachapornkul, S. ; Jitkreeyarn, P. ; Somsiri, P. ; Chayopitak, Nattapon
Author_Institution :
Adv. Autom. & Electron. Res. Unit, Nat. Electron. & Comput. Technol. Center, Khlong Luang, Thailand
Abstract :
In this paper an improvement technique for the current distortion of the three-phase switched reluctance motor (SRM) drive system is proposed. The proposed control method is based on the concept of superimposing the DC current into the current control loop of the cascaded double three-phase full bridge based converter. The tested machine is a 1.5 kW, 3-phase, 6-stator-pole and 4-rotor-pole SRM. The effectiveness of the proposed control method is verified by the simulation results.
Keywords :
electric current control; machine control; power convertors; reluctance motor drives; 3-phase 6-stator-pole 4-rotor-pole SRM; DC current; cascaded double three-phase full bridge-based converter; current control loop; current distortion; power 1.5 kW; three-phase SRM drive system; three-phase full bridge converter; three-phase switched reluctance motor drive system; Bridge circuits; Bridges; Multichip modules; Reluctance motors; Switches; Torque; Bipolar excitation; Switched Reluctance Motors; Three-phase full bridge converter; Torque capacity;
Conference_Titel :
Control and Modeling for Power Electronics (COMPEL), 2013 IEEE 14th Workshop on
Conference_Location :
Salt Lake City, UT
Print_ISBN :
978-1-4673-4914-7
DOI :
10.1109/COMPEL.2013.6626446
