Title :
Modelling and torque control of a five-phase permanent-magnet synchronous motor using tooth-concentrated winding technology
Author :
Sneessens, C.H. ; Labbé, T. ; Baudart, F. ; Labrique, F. ; Matagne, E.
Author_Institution :
Centre de Rech. en Mecatronique, Univ. Catholique de Louvain, Louvain-la-Neuve, Belgium
Abstract :
This paper deals with the modelling and the control of a five-phase machine using a tooth-concentrated winding technology. It is shown that the control of the torque can be easily performed in a generalized dq reference frame, and that with this control the motor can still operate when the feeding of one phase is lost. This makes the motor under study and its control architecture a good candidate when a fault-tolerant drive is needed.
Keywords :
machine control; machine windings; permanent magnet motors; synchronous motors; torque control; control architecture; fault-tolerant drive; five-phase machine; five-phase permanent-magnet synchronous motor; generalized dq reference frame; tooth-concentrated winding technology; torque control; Electromagnetic modeling; Machine windings; Magnetic flux; Paper technology; Power electronics; Rotors; Stators; Synchronous motors; Teeth; Torque control;
Conference_Titel :
Advanced Electromechanical Motion Systems & Electric Drives Joint Symposium, 2009. ELECTROMOTION 2009. 8th International Symposium on
Conference_Location :
Lille
Print_ISBN :
978-1-4244-5150-0
Electronic_ISBN :
978-1-4244-5152-4
DOI :
10.1109/ELECTROMOTION.2009.5259107
