DocumentCode :
345054
Title :
A flying wire system in the AGS
Author :
Huang, H. ; Buxton, W. ; Mahler, G. ; Marusic, A. ; Roser, T. ; Smith, G. ; Syphers, M. ; Williams, N. ; Witkover, R.
Author_Institution :
Brookhaven Nat. Lab., Upton, NY, USA
Volume :
3
fYear :
1999
fDate :
1999
Firstpage :
2128
Abstract :
As the AGS prepares to serve as the injector for RHIC, monitoring and control of the beam transverse emittance become a major and important topic. Before the installation of the flying wire system, the emittance was measured with ionization profile monitors in the AGS, which require correction for space charge effects. It is desirable to have a second means of measuring profile that is less dependent on intensity. A flying wire system has been installed in the AGS recently to perform this task. This paper discusses the hardware and software setup and the capabilities of the system
Keywords :
booster injectors; ion accelerators; particle beam diagnostics; space charge; synchrotrons; AGS; RHIC; beam transverse emittance; flying wire system; hardware; injector; ionization profile monitors; software; space charge effects; Charge measurement; Current measurement; Heating; Ionization; Loss measurement; Magnetic field measurement; Particle beams; Particle scattering; Space charge; Wire;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Particle Accelerator Conference, 1999. Proceedings of the 1999
Conference_Location :
New York, NY
Print_ISBN :
0-7803-5573-3
Type :
conf
DOI :
10.1109/PAC.1999.794395
Filename :
794395
Link To Document :
بازگشت