DocumentCode
3451279
Title
Tapering technique for an embedded microstructure fiber device
Author
Weimin Sun ; Qi Yan ; Yu Haijiao ; Xiaoliang Zhu
Author_Institution
Key Lab. of In-fiber Integrated Opt., Harbin Eng. Univ., Harbin, China
fYear
2013
fDate
7-9 Sept. 2013
Firstpage
186
Lastpage
188
Abstract
In order to further improve the optical efficiency of the optical fiber image slicer, we designed an embedded microstructure fiber slicer. To reduce the transmission loss, we designed and fabricated a large-heating-zone moving planner-flame taper system to manufacture the fiber slicer. We studied the influence of the heating-zone, reasonable heating-zone could improve the device quality. As the heater is mobile and there is air holes in the perform, the heating temperature must be in accurate range.
Keywords
micro-optics; optical design techniques; optical fibre fabrication; optical fibre losses; air holes; embedded microstructure fiber device; heating temperature; large-heating-zone moving planner-flame taper system; optical efficiency; optical fiber image slicer; tapering technique; transmission loss; Brushes; Heating; Optical fiber devices; Optical fiber theory; Photonics; Preforms; astronomy; embedded microstructure fiber devices; optical fiber brush; photonic lantern;
fLanguage
English
Publisher
ieee
Conference_Titel
Optoelectronics and Microelectronics (ICOM), 2013 International Conference on
Conference_Location
Harbin
Print_ISBN
978-1-4799-1214-8
Type
conf
DOI
10.1109/ICoOM.2013.6626524
Filename
6626524
Link To Document