DocumentCode :
345257
Title :
A 35 MHz spiral re-buncher cavity for the TRIUMF ISAC facility
Author :
Mitra, A.K. ; Poirier, R.L.
Author_Institution :
TRIUMF, Vancouver, BC, Canada
Volume :
2
fYear :
1999
fDate :
1999
Firstpage :
839
Abstract :
A full-scale prototype of a 35 MHz re-buncher cavity was built for the ISAC project at TRIUMF. The re-buncher will be operated in cw mode to maintain the beam intensity and quality. Due to the longitudinal space limitation in the beam line, a compact spiral structure was constructed and investigated to determine its parameters. Natural frequencies and vibration amplitudes were measured. Vibration amplitudes of the spiral structure with 10 liter per minute water flow are two orders of magnitude lower than the allowable values. Measurements also show that the shunt impedance of the structure is 370 kΩ with a Q of 2740 at a resonant frequency of 39.5 MHz. MAFIA simulation predicts the resonant frequency, Q and shunt impedance to be 39.8 MHz, 5520 and 686 kΩ respectively. Due to poor rf contacts of the prototype cavity, the measured Q is much less than that predicted by MAFIA, however, R/Q values of the prototype and simulation are 135 and 124 respectively. Construction details and final dimensions of the spiral for 35 MHz will also be presented
Keywords :
accelerator cavities; ion accelerators; linear accelerators; particle beam bunching; vibration measurement; 35 MHz; 370 kohm; 39.5 MHz; 5520 kohm; 686 kohm; ISAC; MAFIA; TRIUMF; cw mode; natural frequencies; re-buncher cavity; shunt impedance; spiral re-buncher cavity; vibration amplitudes; Frequency measurement; Impedance; Predictive models; Prototypes; Q measurement; Resonant frequency; Spirals; Structural beams; Vibration measurement; Virtual prototyping;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Particle Accelerator Conference, 1999. Proceedings of the 1999
Conference_Location :
New York, NY
Print_ISBN :
0-7803-5573-3
Type :
conf
DOI :
10.1109/PAC.1999.795373
Filename :
795373
Link To Document :
بازگشت