DocumentCode
345434
Title
Construction and measurement techniques for the APS LEUTL project RF beam position monitors
Author
Gorski, Anthony J. ; Lill, Robert M.
Author_Institution
Accel. Syst. Div., Argonne Nat. Lab., IL, USA
Volume
2
fYear
1999
fDate
1999
Firstpage
1411
Abstract
The design, construction, and assembly procedure of 24 RF beam position monitors used in the Advanced Photon Source low-energy undulator test line and linear accelerator (linac) are described. Beam stability as well as beam positioning capabilities are essential to the LEUTL project. A design objective of the LEUTL facility is to achieve better than 1-μm resolution. The highest care was used in the mechanical fabrication and assembly of the BPM units. The latest experimental results using these BPMs are presented
Keywords
electron accelerators; linear accelerators; particle beam diagnostics; wigglers; APS LEUTL project RF beam position monitors; beam stability; linear accelerator; low-energy undulator test line; measurement techniques; mechanical fabrication; Assembly; Linear accelerators; Linear particle accelerator; Measurement techniques; Particle beams; Radio frequency; Stability; Structural beams; Testing; Undulators;
fLanguage
English
Publisher
ieee
Conference_Titel
Particle Accelerator Conference, 1999. Proceedings of the 1999
Conference_Location
New York, NY
Print_ISBN
0-7803-5573-3
Type
conf
DOI
10.1109/PAC.1999.795565
Filename
795565
Link To Document