Simulation and control of hybrid renewable energy system connected to the grid

This paper presents a control and simulation of hybrid renewable energy system connected to the grid. The studied system includes a photovoltaic panel, synchronous permanent magnet generator based wind turbine, and a battery for storage energy. The PV array and wind systems are connected to the common DC bus by a boost converter. The battery is connected by a bi-directional DC/DC converter, and then integrated into the AC utility grid via a common DC/AC inverter. In order to extract the maximum energy, a simulation study has been carried out according to the meteorological conditions (wind speed and variable solar irradiance) while maintaining power quality at a satisfactory level. In order to capture the maximum power, a MPPT algorithm is applied for both wind turbine and photovoltaic panel. The modeling and simulation of the whole system has been performed under Matlab/Simulink environment. The obtained results show that the current and the voltage of grid side are sinusoidal and alternative forms, and the power injected to the grid is around the power produced by the hybrid system.