Comparison of surface tracking in polymeric insulating materials

Author

Rajini, V. ; Kanchana, K. ; Gowrishree, V. ; Udayakumar, K.

Author_Institution

Electr. Eng. Dept., S.S.N. Coll. of Eng., Tamilnadu, India

Volume

2

fYear

2004

fDate

21-24 Nov. 2004

Firstpage

1513

Abstract

A study was undertaken to investigate the surface tracking phenomena in different polymeric insulating materials. The polymeric materials chosen were silicone rubber (SR), ethylene propylene diene monomer (EPDM), polypropylene and high density polyethylene (HDPE). The tracking test was conducted as per IEC (587) standard under AC and DC voltage with ammonium chloride as the main contaminant. The CCD camera was used to record the progress of tracking. Leakage current was measured by digital storage oscilloscope. Tracking time for each material was observed with different test conditions and comparison was made. Based on the comparison, it could be concluded that silicone rubber has got superior performance to tracking compared to other three materials.

Keywords

CCD image sensors; IEC standards; ammonium compounds; digital storage oscilloscopes; electric current measurement; ethylene-propylene rubber; insulation testing; polyethylene insulation; silicone rubber; surface discharges; CCD camera; IEC 587 standard; ammonium chloride; arclet; carbonization; creepage; current measurement; digital storage oscilloscope; ethylene propylene diene monomer; high density polyethylene; polymeric insulating material; scintillation discharge; silicone rubber; surface tracking test; Conducting materials; IEC standards; Insulation life; Plastic insulation; Polyethylene; Polymers; Rubber; Strontium; Surface contamination; Testing;

fLanguage

English

Publisher

ieee

Conference_Titel

Power System Technology, 2004. PowerCon 2004. 2004 International Conference on

Print_ISBN

0-7803-8610-8

Type

conf

DOI

10.1109/ICPST.2004.1460242

Filename

1460242