• DocumentCode
    3475914
  • Title

    AccuBridge™ towards the development of a DC Current Comparator resistance ratio standard

  • Author

    Brown, Duane ; Wachowicz, Andrew ; Huang, Shiping

  • fYear
    2010
  • fDate
    13-18 June 2010
  • Firstpage
    639
  • Lastpage
    640
  • Abstract
    Inherent ratio errors of 0.1 to 0.2 ppm in the Direct Current Comparator (DCC) have hindered its development as a standalone bridge. By improving the technologies described in the paper, the reduction of the inherent ratio error to <; 0.02 ppm can be achieved. Verification of the ratio accuracy can now be performed from a ratio of 0.07:1 to 14:1 with a resolution of 0.001 ppm. Automatic balancing facilitates the operation of the bridge for more accurate resistance measurements over the range of 0.1Ω to 100 kΩ.
  • Keywords
    calibration; current comparators; measurement standards; AccuBridge technology; DC current comparator resistance ratio standard; automatic balancing; direct current comparator; inherent ratio error reduction; resistance 0.1 ohm to 100 kohm; resistance calibrations; resistance measurements; Bridges; Calibration; Current measurement; Detectors; Electrical resistance measurement; Electromagnetic measurements; Master-slave; Resistors; Voltage; Wounds; AccuBridge™; Direct Current Comparator (DCC); ampere turns; improved partial turn technology; ratio error; turns calibration; variable slave turns;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Precision Electromagnetic Measurements (CPEM), 2010 Conference on
  • Conference_Location
    Daejeon
  • Print_ISBN
    978-1-4244-6795-2
  • Type

    conf

  • DOI
    10.1109/CPEM.2010.5544229
  • Filename
    5544229
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=3475914