DocumentCode :
3479614
Title :
Coupling inductors for supplying pulsating loads with DC/DC converters
Author :
Alou, P. ; Cobos, J.A. ; García, O. ; Prieto, R. ; Uceda, J.
Author_Institution :
Univ. Politecnica de Madrid, Spain
Volume :
2
fYear :
1998
fDate :
17-22 May 1998
Firstpage :
1790
Abstract :
Coupling an auxiliary winding to the output filter inductor of a DC/DC converter has been analyzed to improve dynamic response of the power supply and reduce output voltage deviation when the converter is subjected to severe load steps. Influence of the turns ratio and the coupling coefficient of the coupled inductors has been analyzed. Both parameters have a strong impact on the performance of the converter. The performance of the solution proposed depends highly on the quality of the coupled inductors, namely its leakage inductance. Modern techniques to build these components allow for the low leakage required
Keywords :
DC-DC power convertors; dynamic response; filters; inductance; inductors; DC/DC converters; auxiliary winding coupling; coupled inductors; coupling coefficient; dynamic response improvement; leakage inductance; output filter inductor; output voltage deviation reduction; pulsating loads; turns ratio influence; Capacitors; DC-DC power converters; Filters; Inductance; Inductors; Microprocessors; Power supplies; Power system transients; Topology; Voltage;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Power Electronics Specialists Conference, 1998. PESC 98 Record. 29th Annual IEEE
Conference_Location :
Fukuoka
ISSN :
0275-9306
Print_ISBN :
0-7803-4489-8
Type :
conf
DOI :
10.1109/PESC.1998.703424
Filename :
703424
Link To Document :
بازگشت