DocumentCode :
3483171
Title :
Increased throughput Using lossy material slabs in a stacked microstrip connector for 10Gbps baseband signaling
Author :
Atkinson, Prescott B. ; Gailus, Mark W. ; Sivaprasad, Kondagunta U.
Author_Institution :
Dept. of Electr. Eng., Univ. of New Hampshire, Durham, NH
fYear :
2008
fDate :
16-20 Dec. 2008
Firstpage :
1
Lastpage :
4
Abstract :
In the present study, compared with a baseline case using only low loss air dielectric, the efficacy of six lossy materials in reducing worst-case crosstalk for signal data up to 10 Gbps is evaluated on a simplified connector structure. The connector structure consists of a triple stack up of 5 signal conductor microstrips plus a ground cover for a total of 15 microstrip transmission lines. All lossy materials from this study provide a measurable improvement in SNR, to varying degrees, when tested in this specific shared return conductor microstrip connector structure.
Keywords :
absorbing media; microstrip lines; microwave materials; multiconductor transmission lines; baseband signaling; bit rate 10 Gbit/s; crosstalk; lossy material slabs; microstrip transmission lines; stacked microstrip connector; Baseband; Conducting materials; Connectors; Crosstalk; Dielectric losses; Dielectric materials; Microstrip; Slabs; Throughput; Transmission line measurements;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Microwave Conference, 2008. APMC 2008. Asia-Pacific
Conference_Location :
Macau
Print_ISBN :
978-1-4244-2641-6
Electronic_ISBN :
978-1-4244-2642-3
Type :
conf
DOI :
10.1109/APMC.2008.4958126
Filename :
4958126
Link To Document :
بازگشت