Title : 
A novel lowpass microstrip filter using metal-loaded slots in the ground plane
         
        
            Author : 
Zhang, R. ; Mansour, R.R.
         
        
            Author_Institution : 
Waterloo Univ., Ont., Canada
         
        
        
        
        
        
            Abstract : 
This paper presents a lowpass microstrip filter employing metal-loaded slots etched in the ground plane. The filter exhibits a superior RF performance in comparison with low pass filters that are based on electromagnetic band gap (EBG) structures. Several metal-loaded slot configurations have been proposed and theoretically investigated. A lowpass microstrip filter employing one of these slots is built and tested. The measured results are in good agreement with simulation demonstrating the validity of the proposed concept.
         
        
            Keywords : 
energy gap; low-pass filters; lumped parameter networks; microstrip filters; slot lines; RF performance; electromagnetic band gap structures; ground plane; lowpass filter; lumped-element circuit; metal-loaded slots; microstrip filter; Band pass filters; Brain modeling; Circuit simulation; Etching; Frequency; Metamaterials; Microstrip filters; Passband; Periodic structures; Resonance;
         
        
        
        
            Conference_Titel : 
Microwave Symposium Digest, 2004 IEEE MTT-S International
         
        
        
            Print_ISBN : 
0-7803-8331-1
         
        
        
            DOI : 
10.1109/MWSYM.2004.1338807