Author_Institution :
Dept. of Eng. Sci. & Ocean Eng., Nat. Taiwan Univ., Taipei, Taiwan
Abstract :
This paper proposes a magnetohydrodynamic model that does not assume local thermal equilibrium (LTE) to predict the flow field and electron temperature and species density distributions inside a direct-current nontransferred-arc steam torch with a well-type cathode at atmospheric pressure. A steady, axisymmetric flow is assumed, and the azimuthal velocity component is not neglected. A finite volume method is adopted to solve the continuity equation, the current continuity equation, the momentum equation, and the energy equation according to a k-ε turbulence model. Ohm´s law is used to calculate the induced magnetic field, and Ampere´s circuital law is adopted to compute the current distribution in space. Fifty-two chemical and plasma kinetic equations are employed to describe the interactions among the 12 main species of water plasma, H2O, OH, H, O, H2, O2, HO2, H2O2, O3, H+, O+, and electrons, considered in this paper. The electron temperature is predicted from the transport equation based on the electron energy balance, whereas the transport coefficients of the plasma are obtained from the Chapman-Enskog solution of the Boltzmann equation. The thermal plasma flow of steam inside the plasma torch, which measures 503 mm in length and 9 mm in radius, is predicted to have I=180 A and Q=5 g/s. The non-LTE simulation suggests that a plasma temperature of 11600 K and flow velocity of 3.8 km/s can be achieved at the center of the torch outlet. Compared with the LTE model, the non-LTE calculation yields lower plasma temperature and higher axial velocity at the torch outlet. The calculated electron temperature principally varies between 1 and 3 eV, and energetic electrons occur not only near the electrode surfaces but also within the axial electric arc. The model predictions suggest that the thermal plasma is well approximated as LTE in the hot plasma core, which is- characterized by an isothermal contour of 10 kK, and in the vicinity of the electrodes. The deviation from the LTE condition predominantly grows with the radial coordinate, and the temperature ratio approaches unity at the electrode surfaces. The dominant species components of the water plasma in the inner region (r<; 6 mm) at the torch outlet are monoatomic and ionic species of H and O, whereas the diatomic species and water molecule become relatively important in the outer region (r >6 mm) at the torch outlet.
Keywords :
Boltzmann equation; finite volume methods; hydrogen; hydrogen compounds; ozone; plasma chemistry; plasma collision processes; plasma kinetic theory; plasma magnetohydrodynamics; plasma temperature; plasma torches; plasma transport processes; plasma turbulence; steam; Ampere´s circuital law; Boltzmann equation; Chapman-Enskog solution; H; H2; H2O; H2O2; HO2; O; O2; O3; OH; Ohm´s law; axial electric arc; axial velocity; axisymmetric flow; azimuthal velocity component; chemical equations; current continuity equation; current distribution; density distributions; direct-current nontransferred-arc steam torch; electrode surfaces; electron energy balance; electron temperature; energetic electrons; energy equation; finite volume method; flow field; flow velocity; hot plasma core; induced magnetic field; k-ε turbulence model; local thermal equilibrium; magnetohydrodynamic model; momentum equation; nonequilibrium modeling; plasma kinetic equations; pressure 1 atm; steam plasma; thermal plasma flow; transport coefficients; transport equation; Atmospheric modeling; Electrodes; Hydrodynamics; Magnetohydrodynamic power generation; Mathematical model; Plasma temperature; Nonequilibrium model; nontransferred arc; plasma torch; steam plasma; steam plasma.;