Force and trajectory control of industrial robots in stiff contact

Position-based force control is presented, incorporating compliance in the robot joints and possibly in a force- / torque-sensor and/or the environment. First, the total compliance is identified. Then, in the control phase, the desired pose of the tool center point is computed from the force control error. Thus standard position control may be applied. This leads to an inherently stable control scheme, even with a low sampling rate of the sensor interface and unknown environmental compliance. The method is designed for applications of industrial robots, e.g. assembly tasks. Parallel control considers the existence of a reference trajectory which allows feedforward in force controlled directions. The paper further examines couplings between forces and torques, which are important for partially constrained configurations. A possible impact force is considered when colliding with an unexpected object.