Title :
High resolution emission and transmission imaging using the same detector
Author :
Panse, Ashish S. ; Jain, A. ; Wang, W. ; Yao, R. ; Bednarek, D.R. ; Rudin, S.
Author_Institution :
Med. Phys. Program, Univ. at Buffalo (SUNY), Buffalo, NY, USA
fDate :
Oct. 30 2010-Nov. 6 2010
Abstract :
We demonstrate the capability of one detector, the Micro-Angiographic Fluoroscope (MAF) detector, to image for two types of applications: nuclear medicine imaging and radiography. The MAF has 1024 × 1024 pixels with an effective pixel size of 35 microns and is capable of real-time imaging at 30 fps. It has a CCD camera coupled by a fiber-optic taper to a light image intensifier (LII) viewing a 300-micron thick CsI phosphor. The large variable gain of the LII provides quantum-limited operation with little additive instrumentation noise and enables operation in both energy-integrating (El) and sensitive low-exposure single photon counting (SPC) modes. We used the El mode to take a radiograph, and the SPC mode to image a custom phantom filled with 1 mCi of 1-125. The phantom is made of hot rods with diameters ranging from 0.9 mm to 2.3 mm. A 1 mm diameter parallel hole, medium energy gamma camera collimator was placed between the phantom and the MAF and was moved multiple times at equal intervals in random directions to eliminate the grid pattern corresponding to the collimator septa. Data was acquired at 20 fps. Two algorithms to localize the events were used: 1) simple threshold and 2) a weighted centroid method. Although all the hot rods could be clearly identified, the image generated with the simple threshold method shows more blurring than that with the weighted centroid method. With the diffuse cluster of pixels from each single detection event localized to a single pixel, the weighted centroid method shows improved spatial resolution. A radiograph of the phantom was taken with the same MAF in El mode without the collimator. It shows clear structural details of the rods. Compared to the radiograph, the sharpness of the emission image is limited by the collimator resolution and could be improved by optimized collimator design. This study demonstrated that the same MAF detector can be used in both radioisotope and x-ray imaging, combining the benefits of e- - ach.
Keywords :
CCD image sensors; collimators; data acquisition; diagnostic radiography; fibre optic sensors; gamma-ray detection; image intensifiers; image resolution; medical image processing; phosphors; radioisotope imaging; CCD camera; X-ray imaging; custom phantom imaging; data acquisition; fiber-optic taper; high-resolution emission imaging; high-resolution transmission imaging; light image intensifier; medium energy gamma camera collimator; microangiographic fluoroscope detector; nuclear medicine imaging; phosphor; radiography; radioisotope imaging; real-time imaging; sensitive low-exposure single photon counting modes; size 0.9 mm to 2.3 mm; size 1 mm; size 300 mum; Collimators; Energy resolution; Phantoms; Pixel; Spatial resolution;
Conference_Titel :
Nuclear Science Symposium Conference Record (NSS/MIC), 2010 IEEE
Conference_Location :
Knoxville, TN
Print_ISBN :
978-1-4244-9106-3
DOI :
10.1109/NSSMIC.2010.5874431