DocumentCode
3543983
Title
Laser ablation rates of inconel and alumina with femtosecond and nanosecond pulses
Author
Liu, Xindong ; Chen, Xia
Author_Institution
Center for Ultrafast Opt. Sci., Michigan Univ., Ann Arbor, MI, USA
fYear
1998
fDate
3-8 May 1998
Firstpage
314
Lastpage
315
Abstract
Summary form only given. We report a comparative laser ablation rate study on inconel (nickel alloy) and alumina (aluminum oxide ceramic) using 180-fs and 8-ns pulses. The laser used for the study was a Ti:sapphire chirped-pulse amplification system. The laser wavelength was 800 nm, and the pulse repetition frequency was 1 kHz.
Keywords
alumina; chromium alloys; high-speed optical techniques; laser ablation; nickel alloys; 180 fs; 8 ns; Al/sub 2/O/sub 3/; Ti:sapphire chirped-pulse amplification system; alumina; aluminum oxide ceramic; comparative laser ablation rate study; femtosecond laser pulses; inconel; laser ablation rates; laser wavelength; nanosecond laser pulses; nickel alloy; pulse repetition frequency; Erbium-doped fiber lasers; Laser ablation; Laser beam cutting; Laser transitions; Optical materials; Optical pulses; Power lasers; Pulse amplifiers; Space vector pulse width modulation; Ultrafast optics;
fLanguage
English
Publisher
ieee
Conference_Titel
Lasers and Electro-Optics, 1998. CLEO 98. Technical Digest. Summaries of papers presented at the Conference on
Conference_Location
San Francisco, CA, USA
Print_ISBN
1-55752-339-0
Type
conf
DOI
10.1109/CLEO.1998.676215
Filename
676215
Link To Document