Title :
Disturbance Rejection for a 2-DOF Nonlinear Helicopter Model by Using MIMO Fuzzy Sliding Mode Control with Boundary Layer
Author :
Zaeri, Amir Hossein ; Mohd-Noor, Samsul Bahari ; Isa, Maryam Mohd ; Taip, Farah Saleena ; Marnani, Aida Esmaeilian
Author_Institution :
Dept. of Electr. & Electron. Eng., Univ. Putra Malaysia, Serdang, Malaysia
Abstract :
In this paper, one helicopter model with two degrees of freedom (2-DOF) is controlled by fuzzy sliding mode control with boundary layer (FSMC-BL) while exposed to disturbance. The model is a nonlinear and multi-input multi-output (MIMO) system that requires a MIMO, robust, stable, and nonlinear control to reject the disturbance. These requirements have been satisfied by SMC. In this paper, boundary layer removes the chattering phenomenon and fuzzy logic tunes the switching gains of SMC control law online. The simulation results which are achieved for step and sinusoidal disturbances applied to both pitch and yaw angles, are compared with those of PID control based on linear quadratic regulator algorithm (LQR-PID). Considerable improvement in control signal and yaw angle is observed by using FSMC-BL.
Keywords :
MIMO systems; aircraft control; fuzzy control; helicopters; nonlinear control systems; robust control; variable structure systems; 2-DOF nonlinear helicopter model; FSMC-BL; MIMO fuzzy sliding mode control; SMC control law; boundary layer; chattering phenomenon; control signal; degrees of freedom; disturbance rejection; fuzzy logic; multiinput multioutput system; nonlinear control; pitch angle; robust control; sinusoidal disturbance; stable control; step disturbance; switching gain; yaw angle; Fuzzy logic; Helicopters; MIMO; Simulation; Sliding mode control; Switches; 2-DOF helicopter; Chattering phenomenon; Disturbance rejection; Fuzzy logic; Linear quadratic regulator algorithm; Sliding mode control;
Conference_Titel :
Intelligent Systems, Modelling and Simulation (ISMS), 2012 Third International Conference on
Conference_Location :
Kota Kinabalu
Print_ISBN :
978-1-4673-0886-1
DOI :
10.1109/ISMS.2012.129