TU11/TU12 signal frame alignment and supervisory monitoring ASIC design

Author

Choi, Sung-Hyuk ; Bang, Joon-Hak ; Ko, Je-Soo

Author_Institution

Electron. & Telecommun. Res. Inst., Taejon, South Korea

fYear

1997

fDate

7-10 Sep 1997

Firstpage

147

Lastpage

150

Abstract

In this paper we will go over the functions required for TU unit switching and explain the design of TUSM(TU11/TU12 frame alignment and supervisory monitoring) which executes these functions. VC3 signal termination, TUT11/TU12 signal frame alignment and supervisory monitoring function are essential to execute the TU11/TU12 unit switching in the BDCS (Broadband Digital Cross-connect System) with the 50 M/150 M level and 1.5 M/2 M level cross-connection function. The connection rate of the chip is set to 19.44 Mb/s and it is designed to have signal release/forming, de-multiplexing/muitiplexing of 7 TUG2, frame alignment of 28 TU11 or 21 TU12, VC11/VC12 signal path monitoring function and the monitoring function of signal connection located at the pre/post time switch

Keywords

application specific integrated circuits; broadband networks; demultiplexing; multiplexing; synchronous digital hierarchy; telecommunication network management; telecommunication network routing; 19.44 Mbit/s; ASIC design; TU unit switching; TU11/TU12 signal frame alignment; VC3 signal termination; broadband digital cross-connect system; demultiplexing/muitiplexing; signal connection; signal path monitoring function; signal release/forming; supervisory monitoring; Application specific integrated circuits; Condition monitoring; Routing; Signal design; Signal detection; Signal processing; Switches; Synchronous digital hierarchy; Telecommunication switching; Timing;

fLanguage

English

Publisher

ieee

Conference_Titel

ASIC Conference and Exhibit, 1997. Proceedings., Tenth Annual IEEE International

Conference_Location

Portland, OR

ISSN

1063-0988

Print_ISBN

0-7803-4283-6

Type

conf

DOI

10.1109/ASIC.1997.616995

Filename

616995